Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the front fender of a Seat Ibiza?

Model: Seat Ibiza 6P, 6J - Years 2008-2017
Part: Checks and maintenance

In order to replace the front fender of the Seat Ibiza, first you need to open the hood to loosen the screws that fix the corresponding front headlight, removing it completely from its housing. After the headlight has been removed, you can proceed by loosening the screws that fix the front bumper, located in its central upper part and inside the wheel arches. At this point, you can loosen the fixing screws of the fender, also located inside the wheel arch and on the side of the engine compartment. After removing the old fender, you can insert the new one, mounting all the removed components.

Posted on 23 April 2023 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the front headlight bulb of the Seat Ibiza?
How do you replace the front headlight bulb of the Seat Ibiza?
Seat Ibiza (2002-2009 / 6L) The procedure for replacing the headlight bulb on the Seat Ibiza involves opening the hood to access the components inside the engine compartment: in…
Replacement of the timing belt of the Seat Ibiza 1.4 TSI
Seat Ibiza (2008-2017 / 6P, 6J) Today's main instructions will show us how to dismantle and replace the timing belt of the Seat Ibiza 1.4 TSI, as well as the Volkswagen Polo and Gol…
Information on the Fuse Diagram of the Seat Ibiza 6J
Information on the Fuse Diagram of the Seat Ibiza 6J
Seat Ibiza (2008-2017 / 6P, 6J) This video provides information regarding the fuses of the Seat Ibiza; these are shown on a specific diagram. The fuses of the Seat Ibiza are located…

Other guides you may be interested in

    Frequently Asked Questions

    • Ibiza 2017-2026 - Where is the central locking control unit located on the Seat Ibiza? Read answer

How to Reset the TPMS Light on the 2011 Volkswagen Polo

The orange tyre light indicates that one or more tyres have a pressure below the recommended limit. This can easily be resolved by inflating them correctly or replacing them in case of a puncture. After performing these actions, it is necessary to reset the light and the sensor to obtain new reading data. All you need to do is start the ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point, the reset is complete, and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos