Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin filter on a Seat Ibiza

Model: Seat Ibiza 6J, 6P - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Cabin air filter

See other generations:
Video tutorial

In this video tutorial, you can see how to replace the cabin filter on a Seat Ibiza by following a few simple steps: first, purchase a new pollen filter from an authorised dealer. Next, get inside the vehicle, turn off the engine, and pull the handbrake.

The cabin filter is located under the glove compartment, hidden by a plastic cover. To remove the cover, you will need a Torx spanner to undo the fasteners.

Once the screws are removed, take off the cover and disconnect the cables attached to it. At this point, slide the latch of the filter box cover, remove the cover, and pull out the old filter element from its housing. Position the new filter in place, following the arrows on the filter itself.


Updated on 12 June 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter in the Seat Ibiza
Replacing the Cabin Air Filter in the Seat Ibiza
Seat Ibiza (2002-2009 / 6L) The following steps will show you how to remove and replace the cabin air filter in the Seat Ibiza, following the instructions below. First, open the…
How to replace the cabin air filter of the Seat Ibiza 4
How to replace the cabin air filter of the Seat Ibiza 4
Seat Ibiza (2017-2026 / KJ, 6F) In the following guide dedicated to all of you who own a Seat Ibiza Mk4, we will discover the necessary steps to complete the replacement of the cabi…
How to replace the cabin filter on the Seat Ibiza
How to replace the cabin filter on the Seat Ibiza
Seat Ibiza (2008-2017 / 6J, 6P) To replace the cabin filter on the Seat Ibiza, start by going under the dashboard (behind the glove compartment), where there is a rectangular cover.…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos