Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster from a Seat Leon?

Model: Seat Leon 1M - Years 1999-2005
Part: Instrument cluster

To remove the instrument cluster from a Seat Leon, first loosen the two screws located at the top of the plastic covering the instrument cluster. Once these screws are removed, you can detach the panel around the instrument cluster, allowing access to the screws underneath. By unscrewing these screws and disconnecting the connectors at the back, you can then extract the instrument cluster from its housing and replace it with a new part. After connecting the new unit, reinstall it using the appropriate screws.

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light in a Seat Leon?
How to Reset the Service Light in a Seat Leon?
Seat Leon (2005-2013 / 1P) The procedure to reset the service light in a Seat Leon begins with the vehicle turned off. Looking at the centre of the instrument panel, find a but…
Removing the Centre Instrument Cluster from a Seat Leon
Removing the Centre Instrument Cluster from a Seat Leon
Seat Leon (2005-2013 / 1P) In today's tutorial video, you will see how to remove the centre instrument cluster from a second series Seat Leon. First, get inside the car and rem…
How to Reset the Trip Meter on the Seat Leon?
How to Reset the Trip Meter on the Seat Leon?
Seat Leon (2005-2013 / 1P) The procedure to reset the trip meter on the Seat Leon is done by turning on the instrument panel, inserting the ignition key into the lock and turni…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos