Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre pressure light on the Seat Leon

Model: Seat Leon 1P - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the tyre pressure light on the Seat Leon, turn on the ignition, start the car, and notice that the tyre pressure light is on. To turn it off, reset the anomaly by pressing the button located on the centre console marked "set" (the symbol is the same as the light on the dashboard), holding it until the light goes off; once the light is off, release the button and you can turn off the car. Finally, you can turn the ignition back on and check if the tyre pressure light is still off; if not, repeat the procedure.


Updated on 28 June 2026 by ScegliAuto


Related tutorials

Reset the tire pressure warning of the Seat Leon.
Reset the tire pressure warning of the Seat Leon.
Seat Leon (2012-2019 / 5F, MK 3) These short and simple steps will allow us to reset the tire pressure warning light of the Seat Leon; before resetting the TPMS sensors, it is necess…
How to reset the tyre warning light on the Seat Leon?
How to reset the tyre warning light on the Seat Leon?
Seat Leon (2012-2019 / 5F, MK 3) In this tutorial, you will learn how to reset the tyre warning light on the Seat Leon, a very simple and quick operation to perform only after restor…
How to Reset the Tyre Warning Light on the Seat Leon?
How to Reset the Tyre Warning Light on the Seat Leon?
Seat Leon (2012-2019 / 5F, MK 3) In this tutorial, you will see how to reset the tyre warning light on the Seat Leon, a very simple and quick operation to perform only after restorin…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos