Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Bumper of a Seat Leon?

Model: Seat Leon 1P - Years 2005-2013
Part: Rear bumper

To replace the rear bumper of a Seat Leon, open the boot to access the screws next to the rear lights. By unscrewing these screws, you can remove the lights from their housing by loosening the knob in the boot and disconnecting the connectors. At this point, loosen the screws in the rear light housing, along with those located at the bottom of the bumper itself. The bumper can now be detached by disconnecting the connectors and replacing it with a new one.

Updated on 12 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Bumper from the Seat Leon
How to Remove the Rear Bumper from the Seat Leon
Seat Leon (1999-2005 / 1M) Today, we will discover the step-by-step instructions on how to remove and replace the rear bumper of the Seat Leon in simple steps. First, open the …
Guide to disassembling the rear bumper of the Seat Leon
Guide to disassembling the rear bumper of the Seat Leon
Seat Leon (2005-2013 / 1P) Today's main instructions will show us how to disassemble and replace the rear bumper of the Seat Leon. First, we open the rear hatch of the trunk an…
How to Remove the Rear Bumper on a Seat Leon
How to Remove the Rear Bumper on a Seat Leon
Seat Leon (2005-2013 / 1P) How to remove the rear bumper on a Seat Leon? Let's go through the various steps. This operation is not too complex if done in order. Using a screwdr…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos