Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting the Rear Light Fitting on the Seat Arona

Model: Seat Arona MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Checks and maintenance

Video tutorial

Let's see how to fit the rear light fitting on the Seat Arona. We will use the light fitting from a Fiat 600: first, create a template from cardboard to facilitate cutting the headlining, measuring 5.5x11 cm. Apply it to the headlining where you want to fit the light fitting, using bodywork tape, then cut with a craft knife.

Now, perform the connection: remove the two screws from the light fitting using a 15 mm Torx screwdriver, then pull the light fitting down and disconnect the connector from the front light fitting to work on the wiring; there are 5 wires, but we are only interested in the brown, red, and blue ones.

Pull 3 wires from the front hole to the rear one, then solder the three wires to the connector of the light fitting: the left wire connects to the brown wire of the Seat light fitting, the centre wire to the red one, and the right wire to the blue one. Connect the light fitting, then cover the wires with a suitable sheath to prevent exposed wires from touching, then bridge the wires to those of the connector, securing the connections with insulating tape.

Refit the light fittings inside the headlining and you're done.


Updated on 17 July 2026 by ScegliAuto


Related tutorials

How to assemble the seat armrest of the Seat Arona
How to assemble the seat armrest of the Seat Arona
Seat Arona (2017-2026 / MK 1) The assembly of the armrest on the driver's front seat of the Seat Arona follows simple and quick steps to be carried out independently. The armrest …
Where to Find the OBD Port on a Seat Arona
Where to Find the OBD Port on a Seat Arona
Seat Arona (2017-2026 / MK 1) In this guide aimed at all of you who own a Seat Arona, we will explain how to easily locate the OBD port inside the cabin. First, open the driver's …
How to Replace the Cabin Air Filter in the Seat Arona
How to Replace the Cabin Air Filter in the Seat Arona
Seat Arona (2017-2026 / MK 1) The procedure to correctly replace the cabin air filter in your Seat Arona is very similar to that used in many other car models. Let’s go through th…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos