Do it yourself
Frequently asked questions about cars and motorcycles

How to Fit Three Child Seats in the Rear Seat

Model: Seat Arona MK 1 - Years 2017-2026
Part: Seat

In this video, a father of three explains how he solved the problem of fitting three child seats in the rear seat of his Seat Arona. Depending on the children's ages, there were various stages. The goal was to fit all three seats in the back, but the seats for children over 3 years old are quite wide and, when placed side by side, exceeded the width of the rear seat. The resourceful father modified the seats by cutting the plastic side armrests (first removing the covers and trimming some edges). This way, the seats fit perfectly next to each other, bringing them closer together by a few centimetres. The user is aware that cutting the armrests voids the seats' approval; however, they remain safe as they keep the child elevated and allow the use of internal straps or the car's seat belts. In this regard, these remain "buried" under the seats: he obtained "rigid seat belt extensions" that can be found under this term on all major online sales platforms. It is important that the extension is "rigid" (with a metal piece and not a flexible belt section), otherwise the buckle risks going back under the seat.

Posted on 23 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Seat Arona (2017-2026 / MK 1) Let's see how to fit the rear light fitting on the Seat Arona. We will use the light fitting from a Fiat 600: first, create a template from cardboard…
Seat Arona (2017-2026 / MK 1) To be able to replace the air filter located inside the cabin of your Seat Arona by yourself, you need to follow all the steps described in this new …
Seat Arona (2017-2026 / MK 1) To replace the wiper blades on the Seat Arona, lift the arms that control their movement to ensure the blades are not in contact with the windscreen.…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos