Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Seat
  4. :
  5. Altea
  6. : How to reset the service in Seat Altea?

Seat Altea - Video tutorial

Model: Seat Altea MK 1 - Years 2004-2015
Part: Checks and maintenance
Operation: How to reset the service in Seat Altea?

Resetting the service light on the Seat Altea is easier said than done. The entire procedure takes only a minute and two simple steps. First, we need to hold down the small button in the center of the dashboard and simultaneously turn the key to the ON position to turn on the instrument panel. Remember that the engine must remain off for the entire time. Immediately after, we turn the button to the right and wait for the reset. Turn off the instrument panel and turn it back on to verify that the procedure has been successful and the light has turned off.


Posted on 27 April 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Altea 2004-2015 - What problems does the Seat Altea 1.9 TDI have? Read Answer
    • Altea 2004-2015 - What are the main issues with the Seat Altea Xl 1.6 TDi with 105 horsepower? Read Answer
    • Altea 2004-2015 - What are the problems with the Seat Altea? Read Answer
    • Altea 2004-2015 - What problems could the Seat Altea XL 1.6 TDI 105 CV have presented in the past? Read Answer
    • Altea 2004-2015 - What are the problems of the Seat Altea 1.6 petrol? Read Answer
    • Altea 2004-2015 - How do you remove the Seat Altea steering lock? Read Answer
    • Altea 2004-2015 - What are the most common problems of the Seat Altea? Read Answer
    • Altea 2004-2015 - What are the problems of the Seal Altea XL? Read Answer
    • Altea 2004-2015 - What problems could the SEAT Altea 1.6 TDI present? Read Answer
    • Altea 2004-2015 - What are the problems with the central locking of the Seat Altea due to? Read Answer
    • Altea 2004-2015 - What are the main problems of the Seat Altea XL? Read Answer
    • Altea 2004-2015 - How to turn off the door light of a Seat Altea? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos