Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Handle of a Seat Ibiza Version 6J Even with a Broken Pin

Model: Seat Ibiza 6P, 6J - Years 2008-2017
Part: Handle

In this video, see how to deal with a broken handle on a Seat Ibiza version 6J: apparently, this is a fairly common problem with these cars, not because the mechanism breaks, but because the handle gets stuck. Essentially, the small pin that holds the handle in place is too weak and breaks, leaving the handle loose, so it cannot be opened from the inside. Our YouTuber demonstrates this very well. To open it - in an emergency, of course, it will still need to be replaced - push it forward and slide it so that by rotating on itself, it can still open.

Updated on 30 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the External Handle on a Seat Ibiza?
Seat Ibiza (2008-2017 / 6P, 6J) To replace the external handle on a Seat Ibiza, open the car door to locate the screw on its side near the handle. Once this screw is loosened, use a…
Fuse location and EOBD port on the Seat Ibiza version 6J.
Fuse location and EOBD port on the Seat Ibiza version 6J.
Seat Ibiza (2008-2017 / 6P, 6J) In this video we see where the fuse boxes of the Seat Ibiza version 6J are located: the first box is located in the passenger compartment, in the low…
Central Locking System in a Seat Ibiza
Central Locking System in a Seat Ibiza
Seat Ibiza (2017-2026 / 6F, KJ) This video illustrates the central locking system in a Seat Ibiza (also applicable to other Seat models, such as Arona, Ateca, and Leon). In particul…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos