Do it yourself
| ||||
|
Seat Leon - Video tutorial
Model: Seat Leon
1P
- Years 2005-2013 In order to replace the rear hatch lock of the Seat Leon, you need to open the hatch so that you can unscrew the fastening screws of the inner panel of the hatch itself. Once these screws have been loosened, it will be possible to detach the panel in order to access its underlying components. Here, you will be able to locate the lock which will need to be disconnected from the appropriate cables and released from its fastening screws. After the old lock has been removed, it will be possible to insert the new one by fixing and connecting it appropriately.
Posted on 25 June 2023 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.022
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |