Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light on the Seat Leon

Model: Seat Leon MK 3, 5F - Years 2012-2019
Part:

In today's video, see how to reset the tyre warning light on the second generation Seat Leon. First, check the correct tyre pressure and, if necessary, adjust it according to the manufacturer's specifications. Once done, turn on the ignition and go to the settings on the central display. Locate the parameters related to the vehicle, then confirm that you want to reset the tyre warning light; after a few seconds, the vehicle will confirm, and you can proceed to drive normally or switch off the vehicle.

Updated on 17 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure light in the Seat Leon?
How to reset the tire pressure light in the Seat Leon?
Seat Leon (2005-2013 / 1P) In this tutorial we can see how to reset the tire pressure light in the Seat Leon, an extremely simple and fast operation, to be done only once the c…
How to reset the tire pressure light in the Seat Leon?
How to reset the tire pressure light in the Seat Leon?
Seat Leon (2005-2013 / 1P) In this tutorial we can see how to reset the tire pressure light in the Seat Leon, an extremely simple and fast operation, to be carried out only onc…
How to reset the tire pressure light in the Seat Leon?
How to reset the tire pressure light in the Seat Leon?
Seat Leon (2020-2026 / KL1, KL8) In this tutorial, we can see how to reset the tire pressure warning light in the Seat Leon, a very simple and quick operation, to be carried out only…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos