Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Seat Leon?

Model: Seat Leon 1P - Years 2005-2013
Part: Service warning light

To reset the service light on a Seat Leon, press and hold the button located in the centre of the instrument cluster. While holding the button, insert the ignition key and turn it to power on the instrument cluster. You can then release the button, turning it until the hour indicator starts to flash: at this point, you can switch off the cluster. When it is turned on again, you will see that the service light has been successfully cleared from the instrument cluster.

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Seat Leon?
How to Reset the Service Light on a Seat Leon?
Seat Leon (2005-2013 / 1P) To reset the Service light on a Seat Leon, press and hold the button located in the centre of the instrument cluster. This allows you to insert the i…
How to Reset the Service Light on a 2009 Seat Leon
How to Reset the Service Light on a 2009 Seat Leon
Seat Leon (2005-2013 / 1P) To reset the service light on a 2009 Seat Leon, get into the vehicle, insert the key, and turn it to the ON position. This allows you to turn on the …
How do you reset the Service light on a Seat Leon?
How do you reset the Service light on a Seat Leon?
Seat Leon (1999-2005 / 1M) It will be possible to completely reset the Service light on the Seat Leon by holding down the button located on the right side of the instrument pan…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos