Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a 2011 Seat Ibiza

Model: Seat Ibiza 6P, 6J - Years 2008-2017
Part: Service warning light

This short video tutorial shows how to reset the maintenance light on your 2011 Seat Ibiza. The procedure is simple, requires no tools or specific software, and takes less than 1 minute. To reset this light, first insert the key without starting the ignition, then press and hold the 0.0/SET button for 5 seconds. After 5 seconds, start the ignition while holding the button; once the ignition is on, release the button and press the button next to the 0.0/SET button. Now turn off the ignition and then restart the ignition and start the engine. At this point, the procedure will be complete and the light will no longer be present on the dashboard.

Updated on 25 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the 2004 Seat Ibiza
How to reset the service light on the 2004 Seat Ibiza
Seat Ibiza (2002-2009 / 6L) Today we will explain how to reset the service on a Seat Ibiza model 6l from 2004. Turn on the car's instrument panel and press the small button loca…
How to reset the service light on a 2011 Seat Ibiza
How to reset the service light on a 2011 Seat Ibiza
Seat Ibiza (2008-2017 / 6P, 6J) In this article, we will see the procedure to reset the maintenance light of the 2011 Seat Ibiza. We recommend performing this procedure only after h…
How to Reset the Service Light on a 2014 Seat Ibiza
How to Reset the Service Light on a 2014 Seat Ibiza
Seat Ibiza (2008-2017 / 6P, 6J) To correctly reset the service light on the instrument cluster of your 2014 Seat Ibiza, follow these simple steps. First, enter the cabin and take yo…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos