Do it yourself
| ||||
|
Seat Cordoba - Video tutorial
Model: Seat Cordoba
MK 2
- Years 2002-2009 There are four types of procedures for programming the new remote control for the Seat Ibiza Cordoba. To perform the first procedure, we need to access the dashboard and leave the first key inserted. Using the second key, we close the vehicle. We press the "Open" button once and hear the sound of the horn. We press the button again for 10 seconds, then turn off the dashboard and try the new remote control. To perform the second procedure, we need to access the dashboard and leave the first key inserted. We use the second key to close the vehicle from the outside. We press the "Open" button and turn the key again to turn off the car's dashboard. The third procedure involves closing the vehicle with the key three times. The LEDs light up, and by holding down the "Open" and "Close" buttons, the remote control will be programmed. For the fourth procedure, we need to open and close the front windows, turn on the dashboard with the secondary key, and lock the car with the key to be programmed. Open and close three times, remove the key, and within 20 seconds, repeat the procedure.
Posted on 9 November 2023 by ScegliAuto
How to adjust the time on the Seat Cordoba - Ibiza
Seat Cordoba (2002-2009 / MK 2) Today's steps will show us how to change the time on the display of the instrument panel of the Seat Cordoba, as well as the Seat Ibiza. First, we ge
How to replace the window regulator button on Seat Cordoba - Ibiza
Seat Cordoba (2002-2009 / MK 2) Let's see below the steps on how to disassemble and replace the window control panel of the Seat Cordoba, but also of the Seat Ibiza. First we open t
How do you reset the Service indicator light of the Seat Cordoba?
Seat Cordoba (2002-2009 / MK 2) In order to reset the Service light of the Seat Cordoba, you need to press and hold the button located on the right side of the instrument panel whil Other guides that may interest you
|
Frequently Asked QuestionsFiat Ducato 2.8 JTD gearbox oil replacementLet's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.066
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |