Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Seat of a Seat Ibiza

Model: Seat Ibiza 6L - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Seat

See other generations:
Video tutorial

Today, we will explain how to remove the rear bench seat in a vehicle produced in the 2000s by the manufacturer "SEAT". To remove the rear seat of the Seat Ibiza produced from 2002 to 2009, first, disconnect the seat belts and then remove the interior screws located underneath and detach the lower bench seat.

Below the bench seat, there is a metal cover that requires a Torx key for removal.

Under the panel is the battery. To reinsert the seat, position it and press down to lock it in place.


Updated on 28 September 2026 by ScegliAuto


Related tutorials

Where is the Fuse Box on the 2012 Seat Ibiza?
Where is the Fuse Box on the 2012 Seat Ibiza?
Seat Ibiza (2008-2017 / 6J, 6P) If you own a 2012 Seat Ibiza and are looking for a guide to quickly find the box containing all the various fuses, just read the following instructio…
Where is the OBD2 port on the Seat Ibiza?
Seat Ibiza (2008-2017 / 6J, 6P) If you own a Seat Ibiza and want to find the location of the OBD2 port for connecting a diagnostic tool, follow the procedure described below. First,…
Guide to Removing the Front Seat of the Seat Ibiza
Guide to Removing the Front Seat of the Seat Ibiza
Seat Ibiza (2002-2009 / 6L) In this brief guide, you will find instructions to remove the front seat of the Seat Ibiza. First, open the front door of the vehicle and start unscr…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos