Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to measure the oil level on the Seat Arona

Model: Seat Arona MK 1 - Years 2017-2026
Part: Checks and maintenance

In this video we see how to check the engine oil level on a Seat Arona: we open the hood, and we see that the dipstick for checking the oil is right in the center, of a bright yellow color. Next to it there is the cap for topping up if needed. To measure the level, first we pull out the dipstick and clean it well with a piece of kitchen paper. The engine must be cold and the car must be level. We dip it back into the tank and pull it out again. Now we can check that the oil level is between minimum and maximum (it should be close to maximum, without ever exceeding it). If it seems that the level is a bit low, add oil half a liter at a time and then measure it again, until you reach the required level.

Posted on 22 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Service a Seat Arona
How to Service a Seat Arona
Seat Arona (2017-2026 / MK 1) The video author shows how to perform a complete service on a Seat Arona, but the procedure is applicable to all car models with the same or a very s…
How to reset the oil warning light on a Seat Arona
How to reset the oil warning light on a Seat Arona
Seat Arona (2017-2026 / MK 1) To correctly reset the engine oil warning light on your Seat Arona, carefully follow the instructions in this guide. The entire procedure takes just …
How to reset the oil change on the Seat Arona
How to reset the oil change on the Seat Arona
Seat Arona (2017-2026 / MK 1) In this article, we will see how to reset the oil change warning light of the Seat Arona, a procedure that is useful in case the light remains on eve…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos