Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Superb
    4. : -board computer

Skoda Superb - -board computer

Skoda Superb (2015-2023 / 3V, B8)
How to reset the partial trip on a Skoda Superb?
Good morning, today I will guide you through the process of resetting the partial trip on your Skoda Superb. To begin, let's carefully enter the car. Then, we …read all…
Posted on 29 February 2024 by ScegliAuto
Skoda Superb (2015-2023 / 3V, B8)
How to reset the tire pressure monitoring system of the Skoda Superb 2020.
The manual reset of the tire warning light on your Skoda Superb third generation (2020 model) is a very simple operation that you can easily perform on your …read all…
Posted on 30 July 2023 by ScegliAuto
Skoda Superb (2008-2015 / 3T, B6)
How to reset the Skoda Superb service
In today's video you will see how to delete the service expired message and reset the related parameter in the Skoda Superb. First we turn on the instrument …read all…
Posted on 9 April 2023 by ScegliAuto
Airbags (2) Glove box (1) Key (4) Timing belt (1) V-belt (1) -board computer (3) Checks and maintenance (17) Bearing (1) Tail light (1) Air filter (1) Cabin air filter (2) Diesel filter (1) Accessory Kit (1) Light bulb (1) Engine oil (1) Door panel (5) Tires (1) Instrument cluster (5) Fuse box (9) Outside rearview mirror (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos