Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Skoda Superb - Key

Skoda Superb (2015-2023 / 3V, B8)
Why is the remote control of the Skoda Superb no longer being recognized?
If the remote control of our Skoda Superb is no longer recognized, it is very likely that the related battery is now completely discharged and therefore needs …read all…
Posted on 25 April 2024 by ScegliAuto
Skoda Superb (2008-2015 / 3T, B6)
Replacement of the Skoda Superb remote control battery.
The remote control that opens and closes the doors of our Skoda Superb contains a battery that, with use and time, runs out and needs to be replaced. To …read all…
Posted on 23 September 2023 by ScegliAuto
Skoda Superb (2015-2023 / 3V, B8)
How to replace the remote control battery of the Skoda Superb?
As we can see in this tutorial, changing the battery of your Skoda Superb remote control is an extremely simple and fast operation. To do this, we will need a …read all…
Posted on 7 December 2022 by ScegliAuto
Skoda Superb (2008-2015 / 3T, B6)
Replace Superb key battery
Is the Superb key's battery flat? Let's see the disassembly of the key and the replacement of the battery. We take our remote control and press the release …read all…
Posted on 15 February 2024 by ScegliAuto
Airbags (2) Glove box (1) Key (4) Timing belt (1) V-belt (1) -board computer (3) Checks and maintenance (17) Bearing (1) Tail light (1) Air filter (1) Cabin air filter (2) Diesel filter (1) Accessory Kit (1) Light bulb (1) Engine oil (1) Door panel (5) Tires (1) Instrument cluster (5) Fuse box (9) Outside rearview mirror (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos