Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service indicator on the Skoda Rapid

Model: Skoda Rapid MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

Video tutorial

In this video we can see how to reset the service light of the Skoda Rapid: with the ignition off we will have to press the button located below the display and labeled "00/set": we will hold it down for a couple of seconds. Turn on the ignition and release the button.

Within twenty seconds we will have to press the button again. At this point the service should be reset: to be sure of the successful completion of the operation, it is recommended to turn off the ignition, wait a few seconds and then turn it back on. If the light is still on, we will have to repeat the entire procedure paying close attention to the timing.


Posted on 3 January 2025 by ScegliAuto


Related tutorials

How to reset the "Service" indicator on a Skoda Rapid?
How to reset the "Service" indicator on a Skoda Rapid?
Skoda Rapid (2012-2019 / MK 1) To reset the "Service" light on a Skoda Rapid, start by turning on the car's ignition. Once it's on, look for the reset button which is usually locat…
How to reset the "Service" light on a Skoda Rapid?
How to reset the "Service" light on a Skoda Rapid?
Skoda Rapid (2012-2019 / MK 1) To reset the "Service" light on a Skoda Rapid, start by turning on the instrument panel without starting the engine. Locate the button positioned und…
How to reset the service light in the Skoda Rapid?
How to reset the service light in the Skoda Rapid?
Skoda Rapid (2012-2019 / MK 1) Resetting the service light in the Skoda Rapid, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure that…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos