Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Bush on the Front Arm of a Skoda Fabia

Model: Skoda Fabia Mark1, 6Y - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Bushings

See other generations:
Video tutorial

This video shows how to remove the bush on the front arm of a Skoda Fabia. First, place the car on a column lift and loosen the wheel nuts with a telescopic spanner, then lift the vehicle to your preferred height and remove the wheel.

Use a socket spanner to unscrew the lower securing bolt of the wishbone and the bolt mounted under the wheel hub, unscrew the bolts on the upper part of the arm as shown in the video. Remove the bush from the bolt housing.

Always compare the replacement parts with the new ones; if they are suitable, you can install them. Now begin the assembly of the new part: fit the new bush, tighten all the bolts on the threads provided.

Double-check that everything is tightened properly, then fit the wheel to complete the job.


Updated on 1 March 2026 by ScegliAuto


Related tutorials

Replacing the Rear Suspension Bush on a Skoda Fabia
Replacing the Rear Suspension Bush on a Skoda Fabia
Skoda Fabia (1999-2007 / Mark1, 6Y) In this video, we see the instructions for removing the bush from the support arm and suspension on a Skoda Fabia; this procedure can be applied to m…
How to Replace the Wiper Blades on a Skoda Fabia SW
How to Replace the Wiper Blades on a Skoda Fabia SW
Skoda Fabia (1999-2007 / Mark1, 6Y) Learn how to replace the wiper blades on the windscreen of a Skoda Fabia SW. Grasp the front wiper blade with your hands, gently pull it as shown in …
How to replace the windshield wiper blades of the Skoda Fabia
How to replace the windshield wiper blades of the Skoda Fabia
Skoda Fabia (2007-2014 / 5J, Mark2) The following video tutorial shows us how to replace the windshield wiper blades of the Skoda Fabia model 2 on our own. We lift the wiper arm and pre…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos