Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Fabia
    4. : Replacement rear suspension support bushing on Skoda Fabia

Skoda Fabia - Video tutorial

Model: Skoda Fabia Mark1, 6Y - Years 1999-2007
Part: Bushings
Operation: Replacement rear suspension support bushing on Skoda Fabia

We see in this video the instructions to be able to disassemble the bushing of the arm support and suspension on a Skoda Fabia; this procedure can be taken into consideration for most of the vehicles on the market. First we disassemble the affected wheel and remove the ball joint from the suspension, unscrewing the bolt; after which we remove the arms, as shown in the video. At this point, using a tool that acts as an extractor, remove the old worn bushing and replace it with the new one; follow the video to the end for reassembly!


Posted on 15 January 2024 by ScegliAuto



Remove the bushing on the front arm of a Skoda Fabia
Skoda Fabia (1999-2007 / Mark1, 6Y) Let's see in this video how to remove the bushing on the front arm of a Skoda Fabia. First we put the car on a column bridge and loosen the wheel pin
Replacement of front swinging arm bushings
Skoda Fabia (1999-2007 / Mark1, 6Y) The breaking of the bushings (silent blok) of the front suspensions is a fairly recurring defect in these cars, making the movement on the bumpy part
Replacement front swing arm bushings
Skoda Fabia (1999-2007 / Mark1, 6Y) The failure of the rubber part of the damper (silent bloc) present on the swinging arm of the suspension is a fairly recurring problem, especially fo

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos