Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Engine Mount on a Skoda Fabia

Model: Skoda Fabia 6Y, Mark1 - Years 1999-2007
Part: Engine mount

Does the engine mount need replacing? Remove the engine mount on the Skoda Fabia. Lift the car with a column lift and secure it. Unscrew the bolts of the engine protection panel, then use a socket wrench to unscrew the metal bar located under the engine bar. Next, remove the previously unscrewed pins, and unscrew the remaining fastening pins around the engine mount plate with your socket wrench. Extract the part from the engine bay and replace it with the new one; insert the part under the metal bar and tighten the pins around the engine mount. Refit the engine cover panel and lower the car.

Updated on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Skoda Fabia (2014-2021 / Mark3, NJ) The following instructions will show you how to replace the timing belt on the Skoda Fabia 1.0 TSI. First, open the bonnet of the vehicle and begin r…
Skoda Fabia (1999-2007 / 6Y, Mark1) In this video, we see the instructions for removing the bush from the support arm and suspension on a Skoda Fabia; this procedure can be applied to m…
Skoda Fabia (2014-2021 / Mark3, NJ) The lower support of the Skoda Fabia does not have protective seals. While some find this ideal for allowing water to drain more easily from the engi…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos