Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset inspection of a Skoda Fabia

Model: Skoda Fabia 5J, Mark2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Checks and maintenance

See other generations:
Video tutorial

In this very short video tutorial today you will see how to reset the inspection in a few simple steps on a Skoda Fabia, second generation model produced from 2007 to 2014. We start the operation by pressing and holding the "0.0" button and then turning on the vehicle's ignition to the first position.

After that, we wait for about three seconds with the button still pressed and then release it. Next, we immediately press and hold the left button on the speedometer for about three seconds as shown in the video, and finally release the button and restart the car.


Posted on 15 January 2025 by ScegliAuto


Related tutorials

How to Reset the Oil Change and Inspection Light on the Skoda Fabia Mk1
How to Reset the Oil Change and Inspection Light on the Skoda Fabia Mk1
Skoda Fabia (1999-2007 / Mark1, 6Y) This guide shows how to reset the engine oil change light and inspection light on the Skoda Fabia Mk1. This operation is very simple and quick, requi…
How to interpret the maintenance alerts of the Skoda Fabia
How to interpret the maintenance alerts of the Skoda Fabia
Skoda Fabia (2014-2021 / Mark3, NJ) Let's see how to interpret maintenance alerts on a Skoda (Fabia as in the video, but in general on all Skodas). When you start the car, a message app…
Reset of the inspection (service) light of the Skoda Fabia
Reset of the inspection (service) light of the Skoda Fabia
Skoda Fabia (2014-2021 / Mark3, NJ) Let's see the information that will allow us to reset the service light for the routine maintenance of the engine oil change for the Skoda Fabia. Fir…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos