Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Oil Change and Inspection Light on the Skoda Fabia Mk1

Model: Skoda Fabia 6Y, Mark1 - Years 1999-2007
Part: Service warning light

This guide shows how to reset the engine oil change light and inspection light on the Skoda Fabia Mk1. This operation is very simple and quick, requiring no specialist tools. First, press and hold the reset button on the trip odometer and turn on the ignition to the first position to enter the reset menu. Then, press the button to select the item to reset, and turn it to the right to execute the reset for the selected item in the menu. Turn off and then turn on the ignition again to confirm the reset operation.

Updated on 17 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Skoda Fabia (2014-2021 / Mark3, NJ) Let's see how to interpret maintenance alerts on a Skoda (Fabia as in the video, but in general on all Skodas). When you start the car, a message app…
Skoda Fabia (2014-2021 / Mark3, NJ) The procedure required for the manual reset of the oil change light on a Skoda Fabia is very simple and takes only a few seconds to complete. First, …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos