Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the key remote control for a Skoda Superb

Model: Skoda Superb B8, 3V - Years 2015-2023
Part: Key

In this video tutorial, we will see how to replace the battery of the key remote for a Skoda Superb car. The procedure is very simple: take the key remote in your hand and press the button on the front of the casing, this way you will release the metal key from inside. At this point, pry the edge of the remote from the side where the empty slot is present and remove the back cover of the remote. You will have access to the battery compartment and can proceed to remove and replace the battery. The required model is a flat CR 2025 3V battery.

Posted on 25 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the battery of the Skoda Superb key remote.
Replacement of the battery of the Skoda Superb key remote.
Skoda Superb (2015-2023 / B8, 3V) In a few simple steps, we will see the process of disassembling and replacing the battery of the remote control key for the Skoda Superb, as well as …
Why is the remote control of the Skoda Superb no longer being recognized?
Why is the remote control of the Skoda Superb no longer being recognized?
Skoda Superb (2015-2023 / B8, 3V) If the remote control of our Skoda Superb is no longer recognized, it is very likely that the related battery is now completely discharged and theref…
Replacement of the Skoda Superb remote control battery.
Replacement of the Skoda Superb remote control battery.
Skoda Superb (2008-2015 / B6, 3T) The remote control that opens and closes the doors of our Skoda Superb contains a battery that, with use and time, runs out and needs to be replaced.…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos