|
Do it yourself
| |||
| ||||
Replacement of the window regulator mechanism of the Skoda Fabia 1.
Model: Skoda Fabia
Mark1, 6Y
- Years:
1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Video tutorial
Let's see how to replace the window regulator of a Skoda Fabia 1: we need to remove the internal cover of the door: the screws are located under the handle knob and in the storage compartment; with a flat screwdriver we will then release the plastic clips along the edges. Disconnect the window regulator connector and the speaker cable. Remove the rubber seal from the window and unscrew the screws from the mechanism attached to the door. We will fix the glass to the door with bodywork adhesive tape, to prevent it from falling down, then we remove the mechanism from the door, being careful with the cables and the glass guides. We can get the new mechanism at a good price for example on E-Bay with the code 151524328259 at the price of 20.99 euros, free delivery. Position it exactly as the old one was, screw in the fixing screws and reconnect the electrical connector. Before reassembling the panel, test the operation; if everything is ok, reassemble the seal and the door cover.
Posted on 12 August 2025 by ScegliAuto
Related tutorials
Skoda Fabia
(2007-2014 /
5J, Mark2)
If you are curious to find out where the fuse box is located inside your Skoda Fabia, then just follow the steps described in the following guide and…
Skoda Fabia
(2014-2021 /
Mark3, NJ)
If you own a third edition Skoda Fabia and want to find out where the interior fuse box is located, all you have to do is follow the steps described …
Skoda Fabia
(2014-2021 /
Mark3, NJ)
In this new mini guide, we will explain how you can replace the headlight bulb of your Skoda Fabia third series (year 2017). The entire procedure tak…
Other guides you may be interested in
|
How to Open the Bonnet on the Mitsubishi L200?
In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.032
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |