Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Service reset on a 2020 Skoda Kodiaq

Model: Skoda Kodiaq MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Service warning light

See other generations:
Video tutorial

In this very short video guide today we can see how to reset the service light, related to the maintenance of the engine oil, on a Skoda Kodiaq, a specific model registered in 2020. So let's start the procedure immediately by pressing and holding the "0.0/SET" button and then turning on the car's instrument panel without starting the engine.

Once we do this, we will see a request to reset the service on the screen, so we release the button and press it again to confirm the operation and thus complete the job as shown in the video.


Posted on 30 August 2025 by ScegliAuto


Related tutorials

Reset the inspection service reminder on the Skoda Kodiaq.
Reset the inspection service reminder on the Skoda Kodiaq.
Skoda Kodiaq (2017-2023 / MK 1) Today we will see the instructions that will allow us to reset the service warning on the Skoda Kodiaq. First of all, we get on board the car and sta…
How to Reset the Service Light on a Skoda Kodiaq?
How to Reset the Service Light on a Skoda Kodiaq?
Skoda Kodiaq (2017-2023 / MK 1) When performing DIY routine maintenance on your Skoda Kodiaq, also known as a service, following the reminder alert for reaching the mileage, you als…
How to Reset the Service Light on the Skoda Kodiaq?
How to Reset the Service Light on the Skoda Kodiaq?
Skoda Kodiaq (2017-2023 / MK 1) In this tutorial, you will see how to reset the service light on the Skoda Kodiaq, a very simple and quick operation. Before proceeding, ensure that …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos