Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the service indicator on the Skoda Fabia.

Model: Skoda Fabia Mark2, 5J - Years 2007-2014
Part: Service warning light

On the Skoda Fabia, the service reminder reset is performed with the ignition on and the engine off. With the vehicle stationary and the doors closed, press and hold the SET/0.0 button on the instrument panel; turn on the ignition, release the button when the service message appears, then press the MIN/OK button to confirm the reset. Alternatively, if the instrument menu is available, go to Settings, then Service/Maintenance, select Reset interval for Oil or Inspection, and confirm. Finally, turn off and restart the Skoda Fabia to check that the warning light is no longer displayed. If the operation is unsuccessful, repeat the sequence, ensuring that the pedals are released and that the ignition is in the ON position without starting the engine.

Posted on 20 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Skoda Fabia (2014-2021 / Mark3, NJ) Today we will see the necessary information in order to reset the service maintenance reminder for the oil change of the Skoda Fabia. First, we get i…
Skoda Fabia (2014-2021 / Mark3, NJ) The spanner symbol appears on the Skoda Fabia to indicate that a service is required. To reset the maintenance interval reminder, proceed as follows:…
Skoda Fabia (2007-2014 / Mark2, 5J) In this very short and useful video guide today, we are shown the entire process necessary to reset the service indicator light, which indicates the …

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos