Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Air Filter of the Skoda Octavia II Diesel

Model: Skoda Octavia MK 2, 1Z - Years 2004-2012
Part: Air filter

Let’s see how to change the air filter on a Skoda Octavia II diesel: with the engine cold, open the bonnet and disconnect the negative terminal of the battery. The air filter box is a black plastic box located in front of the driver (left-hand drive). Locate the large flexible hose that enters the rear flange of the air box. At the end of the hose, there is a metal clamp; use pliers to widen the clamp and disconnect the hose from its seat, using a flat screwdriver. On the top side of the box, there are six star screws; unscrew them, lift the cover, remove the old filter, clean the container well - being careful not to let dirt fall into the intake hose - insert the new filter, close the cover, reconnect the air hose, slide the clamp back into its original position, reconnect the negative terminal of the battery, and you’re done.

Posted on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Skoda Octavia (2004-2012 / MK 2, 1Z) Want to remove the diesel filter from a Skoda Octavia? Here’s how to detach the fuel filter. Lift the front bonnet to access the diesel filter: it is…
Skoda Octavia (2012-2019 / MK 3, 5E) In this video tutorial, learn how to remove and replace the air filter on a Skoda Octavia 1.6 TDI third series, as well as on all other Volkswagen gr…
Skoda Octavia (2012-2019 / MK 3, 5E) If you own a Skoda Octavia Mk3 and want to know how to correctly replace the cabin air filter, just read this guide carefully and put into practice w…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos