Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the Service light on the Škoda Kushaq?

Model: Skoda Skoda Various
Part: Service warning light

You can completely clear the Service light on the Škoda Kushaq by turning on the instrument cluster after inserting the ignition key into the appropriate slot: after turning it on, press the left button located at the bottom centre of the instrument cluster until the indication with the remaining kilometres until the service appears. At this point, press and hold the 0.0/SET button that will be in the same position: this will completely clear the light from the instrument cluster, which can then be turned off to complete the reset procedure.

Posted on 14 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Skoda Skoda Various Today we will see how to reset the service light of the Skoda Kushaq on our own. Press the left button below the instrument panel while turning on th…
Skoda Skoda Various In this tutorial, you will see how to reset the tyre warning light on the Skoda Kushaq, a very simple and quick operation that should be performed on…
Skoda Skoda Various In this tutorial, we will see how to reset the tyre warning light on a Skoda Kushaq, an extremely simple and quick operation, to be performed only af…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos