Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Fabia
    4. : Removing the rear light of a Skoda Fabia

Skoda Fabia - Video tutorial

Model: Skoda Fabia Mark1, 6Y - Years 1999-2007
Part: Rear light bulb
Operation: Removing the rear light of a Skoda Fabia

Removing the rear light of a Skoda Fabia. We open the bonnet of the luggage compartment, remove the inspection cap and (located on the side of the luggage compartment) with a screwdriver unscrew (with a socket wrench or screwdriver with insert) the tightening nuts placed on the side of the rear light (remove the cover of the luggage compartment at the top); as soon as the rear light is free from any constraint, we can detach it from the bodywork (disconnect the relative power supply terminals). We replace the damaged headlight and bulbs with pieces of the same size and voltage. Finally we are going to reassemble the new headlight by proceeding backwards in the assembly operations.


Posted on 22 November 2023 by ScegliAuto



Skoda Fabia rear light bulbs replacement
Skoda Fabia (2014-2021 / NJ, Mark3) In this video tutorial we will see how to remove and replace the rear light bulbs of a Skoda Fabia. First we go to open the tailgate of the trunk and
How to replace the exterior mirror on a Skoda Fabia
Skoda Fabia (1999-2007 / Mark1, 6Y) Before starting, we will have to open the front door of our Skoda Fabia. Let's start by disassembling and removing the window control panel. After th
Fold up the rear seat of the Skoda Fabia
Skoda Fabia (2007-2014 / 5J, Mark2) Let's see how the rear seat of the Skoda Fabia flips. We grab the seat of the seat and move it from under the backrest, then place it near the front

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos