Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fold up the rear seat of the Skoda Fabia

Model: Skoda Fabia 5J, Mark2 - Years 2007-2014
Part: Seat

Let's see how the rear seat of the Skoda Fabia flips. We grab the seat of the seat and move it from under the backrest, then place it near the front backrest. Disassemble the headrests if they are obstructed and pull the lever located in the seat back, tilt the back forward: let it rest on the seat of the seat itself. We carry out the same operations on the other rear seats of the car. We bring the rear seats up once we are done using it. We completely disassemble the rear seats if we want to repair them or if we want to replace them.

Posted on 1 December 2020 by ScegliAuto

This video is currently unavailable

Related tutorials

How to adjust the handbrake in the Skoda Fabia?
How to adjust the handbrake in the Skoda Fabia?
Skoda Fabia (1999-2007 / 6Y, Mark1) In this tutorial, we can see how to adjust the handbrake on the Skoda Fabia, a very simple and quick operation. First, we park the vehicle on a flat …
How to disassemble the rear taillight of the Skoda Fabia
How to disassemble the rear taillight of the Skoda Fabia
Skoda Fabia (2014-2021 / Mark3, NJ) Today's steps will illustrate the process of disassembling and replacing the rear taillight and its bulbs on the Skoda Fabia. First, we open the rear…
Remove rear seat on Skoda Fabia
Remove rear seat on Skoda Fabia
Skoda Fabia (1999-2007 / 6Y, Mark1) Do we want to remove the back seat of our car? Let's see how the seats fold down and disassemble. Lift the rear seat seats and place them vertically,…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos