|
Do it yourself
| |||
| ||||
Repairing the Ignition Key Switch
Model: Skoda Fabia
6Y, Mark1
- Years 1999-2007
Key jamming in the ignition switch is a fairly common fault: it is due to wear of the internal components that, rubbing against each other, generate metallic dust that jams the mechanism; the situation worsens if you attempt to lubricate the lock with spray, which will tend to gum everything up, further jamming the system. The solution to the problem is therefore complete disassembly of all elements that make up the ignition switch, followed by thorough cleaning and reassembly. Once the ignition switch is removed from the steering column, extract the lock by inserting a pick into the slot along the edge of the lock and turning it with the key until it aligns with the hole in the plastic collar: only in this position can the lock be extracted. Proceed to remove all internal elements (plastic ring, aluminium ring with central sleeve, activation mechanism of the switch with spring and washer, steering lock pin): clean everything thoroughly and reassemble, aligning correctly. Perform function tests before reinstalling.
Updated on 7 February 2026 by ScegliAuto
Video tutorial
Related tutorials
Skoda Fabia
(2007-2014 /
Mark2, 5J)
To reset the Service light on a Škoda Fabia, press and hold the 0.0 button located in the centre of the instrument cluster while it is turned off. Co…
Skoda Fabia
(2007-2014 /
Mark2, 5J)
To reset the Service light on a Škoda Fabia, press and hold the 0.0 button located in the centre of the instrument cluster while it is off. With the …
Skoda Fabia
(2007-2014 /
Mark2, 5J)
On the Škoda Fabia, the procedure to reset the Service light is performed by holding down the 0.0 button located in the centre of the instrument clus…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.147
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |