Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Assembling Door Panel

Model: Skoda Fabia 5J, Mark2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Door trim panel

See other generations:
Video tutorial

The tools required for this operation are: a flat-head screwdriver, a Phillips screwdriver, a Torx key, and a spatula. Dismantle the handle cover and unscrew the retaining screws located under the covering plastic.

Also unscrew all the screws of the panel located on the sides and, using the spatula, gently remove the panel along the edges, which should be carefully pulled upwards. Remove the mirror cover on the pillar.

Carefully remove the electrical contacts by disconnecting the connectors, taking care not to tear them. Refit the new panel starting with the connection of the electrical cables.

Position the panel upwards and then push it down until it clicks into place. Reinsert the screws.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

How to Remove the Front Door Panel of a Skoda Fabia
How to Remove the Front Door Panel of a Skoda Fabia
Skoda Fabia (1999-2007 / Mark1, 6Y) Before you start, open the front door of your Skoda Fabia. Begin by prising off and removing the window crank by simply releasing the retaining clip.…
Removing the Door Side Panel on Skoda Fabia
Removing the Door Side Panel on Skoda Fabia
Skoda Fabia (1999-2007 / Mark1, 6Y) Want to remove the door cover panel? Here’s how to remove the door panel on a Skoda Fabia. Detach the plastic covers from the handle, unscrew the sec…
Removing the Front Door Panel of the Skoda Fabia
Removing the Front Door Panel of the Skoda Fabia
Skoda Fabia (2007-2014 / 5J, Mark2) Let’s look at removing the door panel of the Skoda Fabia to replace it or perform maintenance inside the door. Unscrew the screws located in the spac…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos