Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Fabia
    4. : After market double din radio installation

Skoda Fabia - Video tutorial

Model: Skoda Fabia 5J, Mark2 - Years 2007-2014
Part: Car stereo
Operation: After market double din radio installation

In order to disassemble the original car radio, first remove the plastic frame around it (you can also use an old credit card); then unscrew the fixing screws of the car radio and remove it from its seat by pulling it forwards so as to be able to disconnect the relevant sockets. Remove the side panel covering the dashboard in order to position the GPS antenna under the windshield and route the cable from the back of the dashboard to the car radio. Then connect the gps and fm antennas to the new car radio; use the adapter harness supplied to connect it to the original sockets and place the aux output. Finally, fix the car radio with the screws and apply the frame.


Posted on 19 July 2023 by ScegliAuto



How to enter the radio unlock code in the Skoda Fabia?
Skoda Fabia (1999-2007 / Mark1, 6Y) In this tutorial we can see how to enter the radio unlock code in the Skoda Fabia, an extremely simple and quick operation, to be carried out for exa
Replacement rear suspension support bushing on Skoda Fabia
Skoda Fabia (1999-2007 / Mark1, 6Y) We see in this video the instructions to be able to disassemble the bushing of the arm support and suspension on a Skoda Fabia; this procedure can be
Disassembly of the Skoda Fabia radio antenna
Skoda Fabia (1999-2007 / Mark1, 6Y) In this video tutorial we will see how to remove the car radio antenna of a first series Skoda Fabia. First we go to unscrew the antenna from its bas

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos