Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Octavia
    4. : How to reset the service light on the Skoda Octavia

Skoda Octavia - Video tutorial

Model: Skoda Octavia MK 3, 5E - Years 2012-2019
Part: -board computer
Operation: How to reset the service light on the Skoda Octavia

Below we will find out together how to properly reset the maintenance light of the Skoda Octavia Mk3. Fortunately it is a completely harmless warning light, in fact, it does not indicate a malfunction of the car but is a simple reminder that reminds the motorist of the need to carry out routine maintenance on the car. To eliminate it, therefore, just intervene directly on the controls inside the instrument panel. First, hold down the "0.0 / Set" button (located between the tachometer and the speedometer) and at the same time turn on the ignition. Release it as soon as you are asked to confirm the reset and immediately afterwards press it one last time. Turn off the ignition and the procedure is over.


Posted on 8 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Octavia 2012-2019 - What does the coolant warning light mean in the Skoda Octavia? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos