Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Scala
    4. : How to reset AdBlue on Skoda Scala 1.6

Skoda Scala - Video tutorial

Model: Skoda Scala MK 1 - Years 2019-2024
Part: -board computer
Operation: How to reset AdBlue on Skoda Scala 1.6

In this video we will show you how to reset the AdBlue on the Skoda Scala 1.6. When the system signals an error due to a low AdBlue level, three warning lights come on: 1) The one on the instrument panel, 2) The one on the On-Board Computer and 3) The one on the star key next to the gear lever. To reset the AdBlue system you must stop the vehicle and switch off the engine. Turn the instrument panel off for a few seconds and then turn it on again. Now hold down the Start button near the gear lever and wait for the lights on the instrument panel and on the on-board computer to go out. Turn off the electrical panel and wait a few seconds. After that turn it back on. If the operation was successful, the various warning lights will have gone out.


Posted on 3 December 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos