Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Octavia
    4. : How to change the headlight bulb of the Skoda Octavia

Skoda Octavia - Video tutorial

Model: Skoda Octavia MK 3, 5E - Years 2012-2019
Part: Headlight bulb
Operation: How to change the headlight bulb of the Skoda Octavia

In this short and simple guide, let's see how to disassemble and replace the Skoda Octavia headlight bulb, following the instructions below. First we open the bonnet and start removing the bulb protection cover; then we disconnect the low beam electrical connector, unhooking the metal clip to remove it from the headlight, as shown in the video. At this point, replace the low beam bulb with the new one, of the right type and having the same socket (in this case, the H7 type); insert it on the light and connect it, applying the reverse procedure!


Posted on 11 June 2023 by ScegliAuto



Skoda Octavia headlight bulb replacement
Skoda Octavia (1996-2004 / 1U, MK 1) In this video we will see how to replace the bulb of the first generation Skoda Octavia. To do this, first of all we open the engine hood of our car
How to replace the headlight bulb on Skoda Octavia 2
Skoda Octavia (2004-2012 / MK 2, 1Z) If the headlight bulb of your Skoda Octavia second series (year 2004-2012) has suddenly stopped working and you want to find out how to replace it, t
How to change the headlight bulb of a Skoda Octavia
Skoda Octavia (2004-2012 / MK 2, 1Z) Let's see how to change the headlight bulbs on a Skoda Octavia. We open the front hood by pulling the lever located at the bottom right of the dashbo

How do you reset the tire pressure warning light on Hyundai I10?

In order to reset the tire pressure warning light on the Hyundai I10 there is no procedure that can be carried out independently. First of all, the flat tires must be returned to the correct inflation pressure, indicated on the sticker stuck in the driver's door pillar. Once the tire in question has been inflated, a diagnostic tool can be connected to the vehicle's OBD port so that the error can be reset. By following the procedure indicated in the tutorial, it will be possible to reset the warning light and turn on the ignition to check that everything has been done correctly.

Watch the video!


by ScegliAuto

More videos