Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the total and trip odometers on the Skoda Octavia 3

Model: Skoda Octavia 5E, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Warning light – error code

See other generations:
Video tutorial

To manually reset the total and trip odometer entries (Trip A and Trip B) displayed on the instrument cluster of your Skoda Octavia Mk3 (2012-2019), follow this simple procedure. First, get into the car and turn on the ignition.

Then, press the menu button multiple times until you see "Trip A" on the display. To reset it, press the "0.0/Set" button located at the bottom centre of the cluster once.

Repeat the same operation for "Trip B" and finally, turn off the ignition.


Updated on 7 August 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Skoda Octavia
How to Reset the Service Light on a Skoda Octavia
Skoda Octavia (2012-2019 / 5E, MK 3) Today, we will see how to reset the service light on your Skoda Octavia. With a few simple steps, you can turn off the light. Press the button locate…
How to Reset the Service Light on the Skoda Octavia?
How to Reset the Service Light on the Skoda Octavia?
Skoda Octavia (2004-2012 / 1Z, MK 2) In this tutorial, see how to reset the service light on the Skoda Octavia, an extremely simple and quick operation to perform only after completing a…
Where is the fuse box located in the cabin of the Skoda Octavia?
Where is the fuse box located in the cabin of the Skoda Octavia?
Skoda Octavia (1996-2004 / MK 1, 1U) If you are looking for the fuse box of the passenger compartment inside your first series Skoda Octavia, all you have to do is follow the steps descr…

    Frequently Asked Questions

    • Octavia 2012-2019 - What does the p171900 fault code on the Skoda Octavia mean? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos