Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Seats in a Skoda Octavia?

Model: Skoda Octavia 5E, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Rear bench seat

See other generations:
Video tutorial

In this tutorial, see how to remove the rear seats in a Skoda Octavia, a very simple and quick operation. First, recline both seat backs, then unclip the plastic cover of the central hinge and undo the bolt located underneath it with a Torx spanner.

Next, extract the entire support, unclip the left seat back, and proceed with the right seat back. At this point, remove the lower supports, grasp the seat base from the outer edge, and unclip it by pulling it upwards.

To fit the replacement, simply follow the reverse procedure.


Updated on 7 August 2026 by ScegliAuto


Related tutorials

How to remove the rear seats of the Skoda Octavia
How to remove the rear seats of the Skoda Octavia
Skoda Octavia (2012-2019 / 5E, MK 3) In this short guide, we will see how to disassemble and eventually replace the rear seats (bench and backrest) of the Skoda Octavia. First, we open t…
How to remove the rear seats in the Skoda Octavia?
How to remove the rear seats in the Skoda Octavia?
Skoda Octavia (2004-2012 / 1Z, MK 2) In this tutorial, we can see how to remove the rear seats in the Skoda Octavia, an extremely simple and quick operation. First of all, we open both r…
How to Remove the Front Seats in the Skoda Octavia?
How to Remove the Front Seats in the Skoda Octavia?
Skoda Octavia (2012-2019 / 5E, MK 3) In this tutorial, see how to remove the front seats in the Skoda Octavia, a very simple and quick operation. First, open the doors, then fully slide …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos