Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Karoq
    4. : How to reset the service on the Karoq.

Skoda Karoq - Video tutorial

Model: Skoda Karoq MK 1 - Years 2017-2024
Part: Checks and maintenance
Operation: How to reset the service on the Karoq.

In this video, it is shown how to reset the service indicator on the Skoda Karoq. This procedure is very simple and fast. It is recommended to perform this procedure only after having had the maintenance service done. To perform the reset, you need to press the 0.0/set button located in the center of the instrument panel and, while holding it, start the ignition. At this point, the maintenance reset indicator will appear. Release the button and press it once to perform the reset. This process takes less than a minute and no special tools or software are required.


Posted on 30 January 2024 by ScegliAuto

    Frequently Asked Questions

    • Karoq 2017-2024 - What to do when the central locking system of the Skoda Karoq is not working? Read Answer
    • Karoq 2017-2024 - How much is the coupon for the Skoda Karoq? Read Answer
    • Karoq 2017-2024 - When to service the Skoda Karoq? Read Answer
    • Karoq 2017-2024 - How do I reset the Service light on the Å koda Karoq? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos