Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Citigo
    4. : Schema and positioning of the fuses in the Skoda Citigo.

Skoda Citigo - Video tutorial

Model: Skoda Citigo MK 1 - Years 2011-2020
Part: Fuse box
Operation: Schema and positioning of the fuses in the Skoda Citigo.

The following steps will show us the layout and positioning of the fuse boxes in the Skoda Citigo, as well as the Volkswagen Up and Seat Mii. First, we open the front door on the driver's side and start by removing the plastic side panel on the dashboard, thus accessing the internal fuse box. Then, we locate the external fuse box, located in the engine compartment on the upper right, by removing the plastic cover. All fuse codes are listed in the owner's manual and on the diagram shown in the video!


Posted on 2 February 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos