Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Superb
    4. : How to remove the AdBlue warning light in the Skoda Superb?

Skoda Superb - Video tutorial

Model: Skoda Superb 3V, B8 - Years 2015-2023
Part: Checks and maintenance
Operation: How to remove the AdBlue warning light in the Skoda Superb?

If the AdBlue light has come on in the dashboard of our Skoda Superb, it means that we need to refill the antipollution fluid as it has reached the minimum level. This is an extremely simple and quick operation, let's see how to proceed in this tutorial. First of all, we purchase a 10-liter canister of urea from an auto parts store, then we turn off the engine and open the fuel door. Next, we unscrew the blue cap located on the left, insert the canister's tube into the hole, and pour in the necessary amount of liquid to reach the maximum level.


Posted on 10 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Superb 2008-2015 - Why does the central locking of the rear door of a Skoda Superb not work? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos