Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Skoda
  4. :
  5. Superb
  6. : How to reset the partial trip on a Skoda Superb?

Skoda Superb - Video tutorial

Model: Skoda Superb 3V, B8 - Years 2015-2023
Part: -board computer
Operation: How to reset the partial trip on a Skoda Superb?

Good morning, today I will guide you through the process of resetting the partial trip on your Skoda Superb. To begin, let's carefully enter the car. Then, we will need to turn on the instrument panel. Once we have done that, we will need to locate the control button for the partial trip, located below the instrument panel. Once we have found the button, let's proceed by pressing it. We will need to hold it down for a few seconds. This will reset the partial trip, allowing us to start from scratch. Once we release the button, we will have successfully completed the reset of the partial trip on our Skoda Superb.


Posted on 29 February 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos