Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on a Skoda Rapid

Model: Skoda Rapid MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Warning light – error code

Video tutorial

If, when you turn on the instrument cluster of your Skoda Rapid, you notice that the maintenance light does not turn off despite having recently serviced the car, do not worry. With the following procedure, you can reset it in seconds and at no cost.

First, get into the car and ensure that the ignition is off. At this point, press and hold the "0.0/Set" button located at the bottom centre of the cluster, then turn on the ignition. Wait a few seconds and release the button as soon as the reset is complete.


Updated on 18 September 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Warning Light on the Skoda Rapid?
How to Reset the Tyre Warning Light on the Skoda Rapid?
Skoda Rapid (2012-2019 / MK 1) In this tutorial, you will see how to reset the tyre warning light on the Skoda Rapid, a very simple and quick operation. Before proceeding, ensure t…
How to Reset the Service Light on a Skoda Rapid?
How to Reset the Service Light on a Skoda Rapid?
Skoda Rapid (2012-2019 / MK 1) In this tutorial, you will see how to reset the service light on a Skoda Rapid, a very simple and quick operation to perform only after completing al…
How to Reset the Oil Light on a Skoda Rapid
How to Reset the Oil Light on a Skoda Rapid
Skoda Rapid (2012-2019 / MK 1) Using the method explained below, you can manually reset the engine oil light on your Skoda Rapid without the need for a professional. First, enter t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos