Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Rapid
    4. : How to reset the oil light on Skoda Rapid

Skoda Rapid - Video tutorial

Model: Skoda Rapid MK 1 - Years 2012-2019
Part: Instrument cluster
Operation: How to reset the oil light on Skoda Rapid

Thanks to the method that we are going to explain to you below, you will be able to manually reset the engine oil light of your Skoda Rapid in a completely manual and autonomous way and therefore without the intervention of a professional. First, get inside the car and get to the driver's side. Locate the "0.0/Set" button located in the lower central area of the framework and hold it down while starting the framework itself. As soon as the question asking if you want to proceed with resetting the warning light appears on the display, release the "0.0/Set" button and press it one last time to confirm the operation.


Posted on 4 April 2023 by ScegliAuto



Oil reset on a Skoda Rapid
Skoda Rapid (2012-2019 / MK 1) Thanks to this very short video guide, you will be able to see the entire procedure necessary to reset the oil change indicator on a Skoda Rapid. Let
How to reset the service in the Skoda Rapid?
Skoda Rapid (2012-2019 / MK 1) In this tutorial we can see how to reset the service in the Skoda Rapid, an extremely simple and quick operation, to be carried out only after comple
How to reset the maintenance light on the Skoda Rapid
Skoda Rapid (2012-2019 / MK 1) If when you turn on the instrument panel of your Skoda Rapid you notice that the maintenance light does not turn off even though you have recently ha

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos