Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil reset on a Skoda Rapid

Model: Skoda Rapid MK 1 - Years 2012-2019
Part: Warning light – error code

Thanks to this very short video guide, you can see the entire procedure necessary to reset the oil change light on a Skoda Rapid. Start the operation by pressing and holding the "0.0" button on the speedometer, then turn on the ignition of the vehicle to the first position. Once done, you will see a request on the information display to perform the service reset, so release the "0.0" button and press the selection knob located on the right side of the steering wheel to confirm the reset and complete the task as shown in the video.

Updated on 22 September 2026 by ScegliAuto

Video tutorial

Related tutorials

What is the fuse diagram for the Skoda Rapid?
What is the fuse diagram for the Skoda Rapid?
Skoda Rapid (2012-2019 / MK 1) If the devices of our Skoda Rapid have suddenly stopped working, we can first of all check the status of the corresponding fuses whose diagrams are i…
How to Open the Fuel Door on the Skoda Rapid?
How to Open the Fuel Door on the Skoda Rapid?
Skoda Rapid (2012-2019 / MK 1) In this tutorial, you will learn how to open the fuel door on the Skoda Rapid, a very simple and quick operation. First, open the driver's door, then…
Fuse Diagram for the Skoda Rapid
Fuse Diagram for the Skoda Rapid
Skoda Rapid (2012-2019 / MK 1) In this video, see how the fuses are distributed in a Skoda Rapid. This vehicle was produced and sold between 2012 and 2019, and no other models of t…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos