Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Right Front Panel of the Skoda Fabia MK3

Model: Skoda Fabia Mark3, NJ - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Body

See other generations:
Video tutorial

In this video, see how to remove the right front panel of the Skoda Fabia MK3: start by removing the two screws located at the bottom of the panel, then take out the clips at the lower part of the panel. Now, remove the upper part of the handle to easily access the other two screws located underneath.

Once these screws are removed, pull the panel towards you; it will now only be held by clips. Naturally, you will need to disconnect the electric window switch cable and the door release cable.

This way, you can access the electrical components inside the metal door and remove them for replacement. Reassembly follows the reverse order.


Updated on 11 October 2026 by ScegliAuto


Related tutorials

Where is the fuse box in the cabin of the Skoda Fabia 3 located?
Where is the fuse box in the cabin of the Skoda Fabia 3 located?
Skoda Fabia (2014-2021 / Mark3, NJ) If you own a third edition Skoda Fabia and want to find out where the interior fuse box is located, all you have to do is follow the steps described …
How do you disassemble the door panel of the Skoda Fabia 2?
How do you disassemble the door panel of the Skoda Fabia 2?
Skoda Fabia (2007-2014 / 5J, Mark2) The disassembly of a car door panel is done for various reasons, such as repairing the lock, the window mechanism, cleaning the panel, etc. It is not…
How to Remove the Front Door Panel of a Skoda Fabia
How to Remove the Front Door Panel of a Skoda Fabia
Skoda Fabia (1999-2007 / Mark1, 6Y) Before you start, open the front door of your Skoda Fabia. Begin by prising off and removing the window crank by simply releasing the retaining clip.…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos