Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to unlock the automatic transmission in the Smart ForTwo?

Model: Smart Smart 451 - Years 2007-2015
Part: Transmission

In this tutorial we can see how to unlock the automatic transmission in the Smart ForTwo, a very simple and quick operation, to be carried out for example to move the vehicle in case of emergency. First of all, we open the driver's door, then we grasp the plastic base of the gear lever and lift it. We then locate the indicated yellow button, hold it down using a screwdriver for example, and at the same time, move the gear lever to the desired position. By placing the lever in neutral, it will be possible to move or tow the vehicle freely.

Posted on 1 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the automatic transmission of the Smart Fortwo
How to adjust the automatic transmission of the Smart Fortwo
Smart (1998-2007 / 450) Below we will see the instructions that will allow us to carry out the adaptation of the automatic transmission of the Smart Fortwo. In order to carr…
How do you reset the automatic transmission of the Smart car?
How do you reset the automatic transmission of the Smart car?
Smart (2007-2015 / 451) On the Smart Fortwo, when the flashing letter N appears on the instrument panel, it means that there is a problem with the automatic transmission. To…
How to Use the Automatic Gearbox on the Smart Fortwo
How to Use the Automatic Gearbox on the Smart Fortwo
Smart (2007-2015 / 451) Today's guide will briefly explain how to use the automatic gearbox on the Smart Fortwo, following these simple and quick steps. First, get in the ve…

    Frequently Asked Questions

    • Smart 2014-2022 - How to unlock the automatic transmission of the Smart? Read answer
    • Smart 2014-2022 - What are the problems with the automatic transmission of the Smart 453? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos