Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Outer Door Panel of a Smart fortwo

Model: Smart Smart 450 - Years 1998-2007
Part: Door trim panel

How do you install the outer door panel of a Smart fortwo? This video explains how to proceed. Before starting the installation, disconnect the battery terminals located in the front engine compartment. Grip the outer panel with your hands, position it against the car door, and align it with the door frame. Use a screwdriver to tighten the securing screws on the inner door panel, and fit the rubber seal on the door next to the glass. Attach all the clips of the door panel, applying pressure around the entire perimeter of the door.

Updated on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Door Panel of the Smart Fortwo
Removing the Door Panel of the Smart Fortwo
Smart (1998-2007 / 450) Today, you will see the instructions that will allow you to remove the inner and outer door panel of the front door of the Smart Fortwo. First, open …
How to remove the outer door panel of the Smart Fortwo.
How to remove the outer door panel of the Smart Fortwo.
Smart (2007-2015 / 451) These short steps will show us how to disassemble and replace the exterior panel of the Smart Fortwo door. First, we open the front door and start un…
Disassembly of the exterior door panel of the Smart Fortwo
Disassembly of the exterior door panel of the Smart Fortwo
Smart (1998-2007 / 450) In this video tutorial, we will see the necessary instructions on how to disassemble and replace the external panel of the front door of the Smart Fo…

Other guides you may be interested in

How to Replace the Alternator on a Citroen Berlingo

For this simple operation, you will need to release the bonnet from the appropriate lever to lift it. Next, for safety and to protect the more delicate circuits, disconnect the cables from the battery. You can now work directly on the motor located under the air intake box. Remove it by unscrewing the various bolts, then working from underneath your vehicle, reach the motor in question. Disconnect the connector that powers it and unscrew the bolts that secure it. Now, simply install the new one.

Watch the video!


by ScegliAuto

More videos